Reduce, categorize, and augment iModel data into optimized representations for consumption by downstream apps.

grouping-and-mapping

---

Gets Audit Trail Entries.

### Audit Query Parameters

`iModelId` (required) - scope to query Audit Trail entries from. `imodels_read` permission is required in specified iModel.

`path` (optional) - hierarchy path to query Audit Trail entries from. All child elements are included. Supported values are:
- mappings
- mappings/{mappingId}
- mappings/{mappingId}/groups
- mappings/{mappingId}/groups/{groupId}
- mappings/{mappingId}/groups/{groupId}/properties
- mappings/{mappingId}/groups/{groupId}/properties/{propertyId}

`after` (optional) - DateTimeOffset value to return the entries from (inclusive). Suports ISO 8601 format e.g. 2023-07-27T02:55:36.77+01:00

`before` (optional) - DateTimeOffset value to return the entries up to (inclusive). Suports ISO 8601 format e.g. 2023-07-27T02:55:36.77Z

### Authentication

Requires `Authorization` header with valid Bearer token for scope `itwin-platform`.

For more documentation on authorization and how to get access token visit [OAUTH2 Authorization](https://developer.bentley.com/apis/overview/authorization/) page.



### Rate limits

All iTwin Platform API operations have a rate limit. For more documentation on that visit [Rate limits and quotas](https://developer.bentley.com/apis/overview/rate-limits/) page.

---


get-audittrail-imodel

iModelId

path

DateTimeOffset value to return the entries from (inclusive).

after

DateTimeOffset value to return the entries up to (inclusive).

before

Optional max items to be sent in response.

$top

Optional token to retrieve next page in paginated response.

$continuationToken

OAuth access token with `itwin-platform` scope

Authorization

Setting to `application/vnd.bentley.itwin-platform.v1+json` is recommended.

Accept

Retrieved Audit Trail Entries successfully.

default

This response indicates that request lacks valid authentication credentials. Access token might not been provided, issued by the wrong issuer, does not have required scopes or request headers were malformed.

HeaderNotFound

InvalidAuthorizationScheme

InvalidHeaderValue

RequiredScopeMissing

Unauthorized

InvalidApplicationTier

The 422 (Unprocessable Entity) status code indicates that the request cannot be processed by the server due to a client error (e.g. malformed request syntax).

InvalidPath

InvalidDateRange

InvalidAfter

InvalidBefore

MultipleAfter

MultipleBefore

MultiplePath

InvalidiModelId

iModelNotFound

MissingiModelId

MultipleiModelIds

MultipleTop

EmptyTop

InvalidTop

TopOutOfRange

MultipleContinuationTokens

This response indicates that the user has sent too many requests in a given amount of time.

The number of requests exceeds the rate-limit for the client subscription.

retry-after

---

Gets the data model of extracted data in Common Data Model (CDM) format.

### Authentication

Requires `Authorization` header with valid Bearer token for scope `itwin-platform`.

For more documentation on authorization and how to get access token visit [OAUTH2 Authorization](https://developer.bentley.com/apis/overview/authorization/) page.

### Authorization

User must have `imodels_read` permission(s) assigned at the iTwin level. iModel specific permissions may also be applied at the iModel level if iModel level permissions are enabled.

Alternatively the user should be an Organization Administrator for the Organization that owns a given iTwin or iModel.

An Organization Administrator must have at least one of the following roles assigned in User Management: Account Administrator, Co-Administrator, or CONNECT Services Administrator. For more information about User Management please visit our Bentley Communities [Licensing, Cloud, and Web Services](https://bentleysystems.service-now.com/community?id=kb_article_view&sys_kb_id=1e5410491b7d8a90f3fc5287624bcb57) wiki page.

### Rate limits

All iTwin Platform API operations have a rate limit. For more documentation on that visit [Rate limits and quotas](https://developer.bentley.com/apis/overview/rate-limits/) page.

---


get-cdm

mappingId

extractionId

MappingNotFound

ExtractionNotFound

CdmNotFound

---

Gets the extracted data in CSV format.

CSV column order matches the entity attribute order returned by the [Get CDM](/apis/grouping-and-mapping/operations/get-cdm) operation.

### Authentication

Requires `Authorization` header with valid Bearer token for scope `itwin-platform`.

For more documentation on authorization and how to get access token visit [OAUTH2 Authorization](https://developer.bentley.com/apis/overview/authorization/) page.

### Authorization

User must have `imodels_read` permission(s) assigned at the iTwin level. iModel specific permissions may also be applied at the iModel level if iModel level permissions are enabled.

Alternatively the user should be an Organization Administrator for the Organization that owns a given iTwin or iModel.

An Organization Administrator must have at least one of the following roles assigned in User Management: Account Administrator, Co-Administrator, or CONNECT Services Administrator. For more information about User Management please visit our Bentley Communities [Licensing, Cloud, and Web Services](https://bentleysystems.service-now.com/community?id=kb_article_view&sys_kb_id=1e5410491b7d8a90f3fc5287624bcb57) wiki page.

### Rate limits

All iTwin Platform API operations have a rate limit. For more documentation on that visit [Rate limits and quotas](https://developer.bentley.com/apis/overview/rate-limits/) page.

---


get-cdm-partition

location

The 422 (Unprocessable Entity) status code indicates that the request cannot be processed by the server due to a client error (e.g. malformed request syntax)

EmptyLocation

MissingLocation

MultipleLocation

PartitionNotFound

---

Gets the logs of an extraction.

### Authentication

Requires `Authorization` header with valid Bearer token for scope `itwin-platform`.

For more documentation on authorization and how to get access token visit [OAUTH2 Authorization](https://developer.bentley.com/apis/overview/authorization/) page.

### Authorization

User must have `imodels_read` permission(s) assigned at the iTwin level. iModel specific permissions may also be applied at the iModel level if iModel level permissions are enabled.

Alternatively the user should be an Organization Administrator for the Organization that owns a given iTwin or iModel.

An Organization Administrator must have at least one of the following roles assigned in User Management: Account Administrator, Co-Administrator, or CONNECT Services Administrator. For more information about User Management please visit our Bentley Communities [Licensing, Cloud, and Web Services](https://bentleysystems.service-now.com/community?id=kb_article_view&sys_kb_id=1e5410491b7d8a90f3fc5287624bcb57) wiki page.

### Rate limits

All iTwin Platform API operations have a rate limit. For more documentation on that visit [Rate limits and quotas](https://developer.bentley.com/apis/overview/rate-limits/) page.

---


get-extraction-logs

---

Gets the status of an extraction.

### Authentication

Requires `Authorization` header with valid Bearer token for scope `itwin-platform`.

For more documentation on authorization and how to get access token visit [OAUTH2 Authorization](https://developer.bentley.com/apis/overview/authorization/) page.

### Authorization

User must have `imodels_read` permission(s) assigned at the iTwin level. iModel specific permissions may also be applied at the iModel level if iModel level permissions are enabled.

Alternatively the user should be an Organization Administrator for the Organization that owns a given iTwin or iModel.

An Organization Administrator must have at least one of the following roles assigned in User Management: Account Administrator, Co-Administrator, or CONNECT Services Administrator. For more information about User Management please visit our Bentley Communities [Licensing, Cloud, and Web Services](https://bentleysystems.service-now.com/community?id=kb_article_view&sys_kb_id=1e5410491b7d8a90f3fc5287624bcb57) wiki page.

### Rate limits

All iTwin Platform API operations have a rate limit. For more documentation on that visit [Rate limits and quotas](https://developer.bentley.com/apis/overview/rate-limits/) page.

---


get-extraction-status

---

Gets all of the extractions that were run on a given iModel.

### Authentication

Requires `Authorization` header with valid Bearer token for scope `itwin-platform`.

For more documentation on authorization and how to get access token visit [OAUTH2 Authorization](https://developer.bentley.com/apis/overview/authorization/) page.

### Authorization

User must have `imodels_read` permission(s) assigned at the iTwin level. iModel specific permissions may also be applied at the iModel level if iModel level permissions are enabled.

Alternatively the user should be an Organization Administrator for the Organization that owns a given iTwin or iModel.

An Organization Administrator must have at least one of the following roles assigned in User Management: Account Administrator, Co-Administrator, or CONNECT Services Administrator. For more information about User Management please visit our Bentley Communities [Licensing, Cloud, and Web Services](https://bentleysystems.service-now.com/community?id=kb_article_view&sys_kb_id=1e5410491b7d8a90f3fc5287624bcb57) wiki page.

### Rate limits

All iTwin Platform API operations have a rate limit. For more documentation on that visit [Rate limits and quotas](https://developer.bentley.com/apis/overview/rate-limits/) page.

---


get-imodel-extractions

---

Run extraction of data from an iModel. This operation has two optional request body parameters: `changesetId` and `ecInstanceIds`. If `ecInstanceIds` are provided, only the ECInstances specified will be extracted. You can provide `changesetId` to run the extraction on a specific [changeset](https://www.itwinjs.org/learning/glossary/#changeset).

If you do not provide the optional request body parameters:

- latest changeset will be used for extraction
- all ECInstances will be extracted that are selected by the group queries

### Extraction Triggers & Configuration

Mappings can be configured with `extractionEnabled` set to `true` or `false`. `true` means that extractions will be automatically executed for the given mapping when a ChangesetGroup is completed (see [`ChangesetGroupCompletedEvent`](/apis/webhooks/#supportedevents)). **Note:** Multiple ChangesetGroups can be completed for a single [Synchronization job](/apis/synchronization/) which will result in multiple automatic extractions.

If `extractionEnabled` is set to `false`, the automatic extractions are disabled. However, extractions can still be executed for a specific mapping manually using the [Run Extraction](/apis/grouping-and-mapping/operations/run-extraction) operation and the `mappings` request body parameter. To have a better control over extractions, it is recommended to set `extractionEnabled` to `false` and manually trigger an extraction when a mapping's extracted data is stale and needs to be refreshed.

### Notes

Data will not be extracted for a mapping if that mapping was already extracted from a newer changeset. If you wish to "go back in time" with a mapping and extract data from an older changeset, you will need to copy the mapping and run extraction on the copy.

### Authentication

Requires `Authorization` header with valid Bearer token for scope `itwin-platform`.

For more documentation on authorization and how to get access token visit [OAUTH2 Authorization](https://developer.bentley.com/apis/overview/authorization/) page.

### Authorization

User must have `imodels_write` permission(s) assigned at the iTwin level. iModel specific permissions may also be applied at the iModel level if iModel level permissions are enabled.

Alternatively the user should be an Organization Administrator for the Organization that owns a given iTwin or iModel.

An Organization Administrator must have at least one of the following roles assigned in User Management: Account Administrator, Co-Administrator, or CONNECT Services Administrator. For more information about User Management please visit our Bentley Communities [Licensing, Cloud, and Web Services](https://bentleysystems.service-now.com/community?id=kb_article_view&sys_kb_id=1e5410491b7d8a90f3fc5287624bcb57) wiki page.

### Rate limits

All iTwin Platform API operations have a rate limit. For more documentation on that visit [Rate limits and quotas](https://developer.bentley.com/apis/overview/rate-limits/) page.

### "Try it out" Limitations

When you run an Extraction with the "Try it out" function on a mapping that was created or modified by using the "Try it out" function, you are limited to 100 extracted rows for each group. Mapping modification is any POST/DELETE/PATCH/PUT request to any endpoint with the tag "Mappings" or if the URL contains {mappingId}.

---


run-extraction

User is not authorized to run extraction on the iModel.

ChangesetNotFound

MappingsEmpty

MissingMappings

EcInstanceIdsEmpty

EcInstanceIdInvalid

---

Creates a group. A group is a collection of design elements from an iModel represented by an [ECSQL](https://www.itwinjs.org/learning/ecsql/) query. When used for reporting a group represents a single output data table in a report. There are two ways to create a group.

### Create a group without properties

To create a group without properties do not provide the `source` property.

### Create a group from an existing group

To create a group from another group provide the `source` property. The server will create a new group and copy over all properties from the group referenced by the `source` property. User must have `imodels_read` permissions to the iModel containing the source group. Changing source group or its properties will not change the copies of them.

Provided `groupName`, `description`, `query`, `metadata` request body properties will overwrite the properties on the copied group.

### Note

The `query` request body property must be provided even when copying a group. Provide the source group query in the request when copying a group if you want to keep the same query.

### Group Query

The `query` parameter of a Group must be a valid ECSQL query.

If a valid ECSQL query is given and the selected class is `bis.Element`, or if it is a descendant of the class `bis.Element`, the only required column is `ECInstanceId`. However, it is recommended to always select at least `ECInstanceId` and `ECClassId` columns.

- `SELECT * FROM bis.Element` is a valid query
- Assuming that class `Building.Beam` is a descendant of the class `bis.Element`, the query `SELECT * FROM Building.Beam` is a valid query
- `SELECT ECInstanceId, ECClassId FROM bis.Element` is a valid query
- Assuming that class `Building.Beam` is a descendant of the class `bis.Element`, the query `SELECT ECInstanceId, ECClassId FROM Building.Beam` is valid
- `SELECT ECClassId FROM bis.Element` is _not_ a valid query because ECInstanceId column is missing
- Assuming that class `Building.Beam` is a descendant of the class `bis.Element`, the query `SELECT ECClassId FROM Building.Beam` is _not_ valid because ECInstanceId column is missing
- Assuming that `Building.BeamAspect` is an aspect, the query `SELECT A.ECInstanceId ECInstanceId FROM bis.Element E JOIN Building.BeamAspect A ON A.Element.id = E.ECInstanceId` is _not_ valid because the selected `ECInstanceId` is of the aspect, not the element
- Assuming that `Building.BeamAspect` is an aspect, the query `SELECT Element.id FROM Building.BeamAspect` is _not_ valid because the selected column's name is not `ECInstanceId`
- Assuming that `Building.BeamAspect` is an aspect, the query `SELECT Element.id ECInstanceId FROM Building.BeamAspect` is valid

In all other cases the provided ECSQL query is required to select `ECInstanceId` and `ECClassId`. If `ECClassId` is omitted, the service assumes that query selects elements from the `bis.Element` class or its descendants. In some cases the results might be unexpected, e.g., you assume that you are querying `bis.ElementAspect` but you only select `ECInstanceId` so the service only selects the elements that have a matching `ECInstanceId`. Because of this it is always recommended to select both `ECInstanceId` and `ECClassId`.

If different queries are needed for a single output table, then create multiple groups with those different queries but with the same name for each group. That will cause results of all these queries to be concatenated into a single output table. The output table will have column list equal to a union of all properties of groups with the same name. The result rows will be concatenated one after another. If groups are overlapping and multiple groups select the same element the result will contain duplicates.

### Authentication

Requires `Authorization` header with valid Bearer token for scope `itwin-platform`.

For more documentation on authorization and how to get access token visit [OAUTH2 Authorization](https://developer.bentley.com/apis/overview/authorization/) page.

### Authorization

User must have `imodels_write` permission(s) assigned at the iTwin level. iModel specific permissions may also be applied at the iModel level if iModel level permissions are enabled.

Alternatively the user should be an Organization Administrator for the Organization that owns a given iTwin or iModel.

An Organization Administrator must have at least one of the following roles assigned in User Management: Account Administrator, Co-Administrator, or CONNECT Services Administrator. For more information about User Management please visit our Bentley Communities [Licensing, Cloud, and Web Services](https://bentleysystems.service-now.com/community?id=kb_article_view&sys_kb_id=1e5410491b7d8a90f3fc5287624bcb57) wiki page.

### Rate limits

All iTwin Platform API operations have a rate limit. For more documentation on that visit [Rate limits and quotas](https://developer.bentley.com/apis/overview/rate-limits/) page.

### "Try it out" Limitations

When you run an Extraction with the "Try it out" function on a mapping that was created or modified by using the "Try it out" function, you are limited to 100 extracted rows for each group. Mapping modification is any POST/DELETE/PATCH/PUT request to any endpoint with the tag "Mappings" or if the URL contains {mappingId}.

---


create-group

User is not authorized to create a Group.

MissingGroupName

MissingQuery

InvalidGroupName

MissingSourceMappingId

InvalidSourceMappingId

InvalidSourceGroupId

DuplicateMetadataKey

---

Deletes a group.

### Authentication

Requires `Authorization` header with valid Bearer token for scope `itwin-platform`.

For more documentation on authorization and how to get access token visit [OAUTH2 Authorization](https://developer.bentley.com/apis/overview/authorization/) page.

### Authorization

User must have `imodels_write` permission(s) assigned at the iTwin level. iModel specific permissions may also be applied at the iModel level if iModel level permissions are enabled.

Alternatively the user should be an Organization Administrator for the Organization that owns a given iTwin or iModel.

An Organization Administrator must have at least one of the following roles assigned in User Management: Account Administrator, Co-Administrator, or CONNECT Services Administrator. For more information about User Management please visit our Bentley Communities [Licensing, Cloud, and Web Services](https://bentleysystems.service-now.com/community?id=kb_article_view&sys_kb_id=1e5410491b7d8a90f3fc5287624bcb57) wiki page.

### Rate limits

All iTwin Platform API operations have a rate limit. For more documentation on that visit [Rate limits and quotas](https://developer.bentley.com/apis/overview/rate-limits/) page.

### "Try it out" Limitations

When you run an Extraction with the "Try it out" function on a mapping that was created or modified by using the "Try it out" function, you are limited to 100 extracted rows for each group. Mapping modification is any POST/DELETE/PATCH/PUT request to any endpoint with the tag "Mappings" or if the URL contains {mappingId}.

---


delete-group

groupId

User is not authorized to delete a Group.

GroupNotFound

---

Retrieves a group.

### Group Query

The `query` parameter of a Group must be a valid ECSQL query.

If a valid ECSQL query is given and the selected class is `bis.Element`, or if it is a descendant of the class `bis.Element`, the only required column is `ECInstanceId`. However, it is recommended to always select at least `ECInstanceId` and `ECClassId` columns.

- `SELECT * FROM bis.Element` is a valid query
- Assuming that class `Building.Beam` is a descendant of the class `bis.Element`, the query `SELECT * FROM Building.Beam` is a valid query
- `SELECT ECInstanceId, ECClassId FROM bis.Element` is a valid query
- Assuming that class `Building.Beam` is a descendant of the class `bis.Element`, the query `SELECT ECInstanceId, ECClassId FROM Building.Beam` is valid
- `SELECT ECClassId FROM bis.Element` is _not_ a valid query because ECInstanceId column is missing
- Assuming that class `Building.Beam` is a descendant of the class `bis.Element`, the query `SELECT ECClassId FROM Building.Beam` is _not_ valid because ECInstanceId column is missing
- Assuming that `Building.BeamAspect` is an aspect, the query `SELECT A.ECInstanceId ECInstanceId FROM bis.Element E JOIN Building.BeamAspect A ON A.Element.id = E.ECInstanceId` is _not_ valid because the selected `ECInstanceId` is of the aspect, not the element
- Assuming that `Building.BeamAspect` is an aspect, the query `SELECT Element.id FROM Building.BeamAspect` is _not_ valid because the selected column's name is not `ECInstanceId`
- Assuming that `Building.BeamAspect` is an aspect, the query `SELECT Element.id ECInstanceId FROM Building.BeamAspect` is valid

In all other cases the provided ECSQL query is required to select `ECInstanceId` and `ECClassId`. If `ECClassId` is omitted, the service assumes that query selects elements from the `bis.Element` class or its descendants. In some cases the results might be unexpected, e.g., you assume that you are querying `bis.ElementAspect` but you only select `ECInstanceId` so the service only selects the elements that have a matching `ECInstanceId`. Because of this it is always recommended to select both `ECInstanceId` and `ECClassId`.

If different queries are needed for a single output table, then create multiple groups with those different queries but with the same name for each group. That will cause results of all these queries to be concatenated into a single output table. The output table will have column list equal to a union of all properties of groups with the same name. The result rows will be concatenated one after another. If groups are overlapping and multiple groups select the same element the result will contain duplicates.

### Authentication

Requires `Authorization` header with valid Bearer token for scope `itwin-platform`.

For more documentation on authorization and how to get access token visit [OAUTH2 Authorization](https://developer.bentley.com/apis/overview/authorization/) page.

### Authorization

User must have `imodels_read` permission(s) assigned at the iTwin level. iModel specific permissions may also be applied at the iModel level if iModel level permissions are enabled.

Alternatively the user should be an Organization Administrator for the Organization that owns a given iTwin or iModel.

An Organization Administrator must have at least one of the following roles assigned in User Management: Account Administrator, Co-Administrator, or CONNECT Services Administrator. For more information about User Management please visit our Bentley Communities [Licensing, Cloud, and Web Services](https://bentleysystems.service-now.com/community?id=kb_article_view&sys_kb_id=1e5410491b7d8a90f3fc5287624bcb57) wiki page.

### Rate limits

All iTwin Platform API operations have a rate limit. For more documentation on that visit [Rate limits and quotas](https://developer.bentley.com/apis/overview/rate-limits/) page.

---


get-group

---

Gets all groups of a mapping.

### Notes

The `Prefer` header can be used to specify how much result metadata is desired by the client. The `Prefer` request header field is used to indicate that particular server behaviors are preferred by the client but are not required for successful completion of the request.

This operation supports `"return=representation"` and `"return=minimal"` preferences.

The `"return=representation"` preference indicates that the client prefers that the server include an entity representing the current state of the resource in the response to a successful request.
The `"return=minimal"` preference indicates that the client wishes the server to return only a minimal response to a successful request. This is the default preference if `Prefer` header is not specified.

### Group Query

The `query` parameter of a Group must be a valid ECSQL query.

If a valid ECSQL query is given and the selected class is `bis.Element`, or if it is a descendant of the class `bis.Element`, the only required column is `ECInstanceId`. However, it is recommended to always select at least `ECInstanceId` and `ECClassId` columns.

- `SELECT * FROM bis.Element` is a valid query
- Assuming that class `Building.Beam` is a descendant of the class `bis.Element`, the query `SELECT * FROM Building.Beam` is a valid query
- `SELECT ECInstanceId, ECClassId FROM bis.Element` is a valid query
- Assuming that class `Building.Beam` is a descendant of the class `bis.Element`, the query `SELECT ECInstanceId, ECClassId FROM Building.Beam` is valid
- `SELECT ECClassId FROM bis.Element` is _not_ a valid query because ECInstanceId column is missing
- Assuming that class `Building.Beam` is a descendant of the class `bis.Element`, the query `SELECT ECClassId FROM Building.Beam` is _not_ valid because ECInstanceId column is missing
- Assuming that `Building.BeamAspect` is an aspect, the query `SELECT A.ECInstanceId ECInstanceId FROM bis.Element E JOIN Building.BeamAspect A ON A.Element.id = E.ECInstanceId` is _not_ valid because the selected `ECInstanceId` is of the aspect, not the element
- Assuming that `Building.BeamAspect` is an aspect, the query `SELECT Element.id FROM Building.BeamAspect` is _not_ valid because the selected column's name is not `ECInstanceId`
- Assuming that `Building.BeamAspect` is an aspect, the query `SELECT Element.id ECInstanceId FROM Building.BeamAspect` is valid

In all other cases the provided ECSQL query is required to select `ECInstanceId` and `ECClassId`. If `ECClassId` is omitted, the service assumes that query selects elements from the `bis.Element` class or its descendants. In some cases the results might be unexpected, e.g., you assume that you are querying `bis.ElementAspect` but you only select `ECInstanceId` so the service only selects the elements that have a matching `ECInstanceId`. Because of this it is always recommended to select both `ECInstanceId` and `ECClassId`.

If different queries are needed for a single output table, then create multiple groups with those different queries but with the same name for each group. That will cause results of all these queries to be concatenated into a single output table. The output table will have column list equal to a union of all properties of groups with the same name. The result rows will be concatenated one after another. If groups are overlapping and multiple groups select the same element the result will contain duplicates.

### Authentication

Requires `Authorization` header with valid Bearer token for scope `itwin-platform`.

For more documentation on authorization and how to get access token visit [OAUTH2 Authorization](https://developer.bentley.com/apis/overview/authorization/) page.

### Authorization

User must have `imodels_read` permission(s) assigned at the iTwin level. iModel specific permissions may also be applied at the iModel level if iModel level permissions are enabled.

Alternatively the user should be an Organization Administrator for the Organization that owns a given iTwin or iModel.

An Organization Administrator must have at least one of the following roles assigned in User Management: Account Administrator, Co-Administrator, or CONNECT Services Administrator. For more information about User Management please visit our Bentley Communities [Licensing, Cloud, and Web Services](https://bentleysystems.service-now.com/community?id=kb_article_view&sys_kb_id=1e5410491b7d8a90f3fc5287624bcb57) wiki page.

### Rate limits

All iTwin Platform API operations have a rate limit. For more documentation on that visit [Rate limits and quotas](https://developer.bentley.com/apis/overview/rate-limits/) page.

---


get-groups

Indicates a level of details in the response. This operation supports 'return=representation' and 'return=minimal' preferences.

Prefer

Minimal

Representation

---

Updates a group.

### Group Query

The `query` parameter of a Group must be a valid ECSQL query.

If a valid ECSQL query is given and the selected class is `bis.Element`, or if it is a descendant of the class `bis.Element`, the only required column is `ECInstanceId`. However, it is recommended to always select at least `ECInstanceId` and `ECClassId` columns.

- `SELECT * FROM bis.Element` is a valid query
- Assuming that class `Building.Beam` is a descendant of the class `bis.Element`, the query `SELECT * FROM Building.Beam` is a valid query
- `SELECT ECInstanceId, ECClassId FROM bis.Element` is a valid query
- Assuming that class `Building.Beam` is a descendant of the class `bis.Element`, the query `SELECT ECInstanceId, ECClassId FROM Building.Beam` is valid
- `SELECT ECClassId FROM bis.Element` is _not_ a valid query because ECInstanceId column is missing
- Assuming that class `Building.Beam` is a descendant of the class `bis.Element`, the query `SELECT ECClassId FROM Building.Beam` is _not_ valid because ECInstanceId column is missing
- Assuming that `Building.BeamAspect` is an aspect, the query `SELECT A.ECInstanceId ECInstanceId FROM bis.Element E JOIN Building.BeamAspect A ON A.Element.id = E.ECInstanceId` is _not_ valid because the selected `ECInstanceId` is of the aspect, not the element
- Assuming that `Building.BeamAspect` is an aspect, the query `SELECT Element.id FROM Building.BeamAspect` is _not_ valid because the selected column's name is not `ECInstanceId`
- Assuming that `Building.BeamAspect` is an aspect, the query `SELECT Element.id ECInstanceId FROM Building.BeamAspect` is valid

In all other cases the provided ECSQL query is required to select `ECInstanceId` and `ECClassId`. If `ECClassId` is omitted, the service assumes that query selects elements from the `bis.Element` class or its descendants. In some cases the results might be unexpected, e.g., you assume that you are querying `bis.ElementAspect` but you only select `ECInstanceId` so the service only selects the elements that have a matching `ECInstanceId`. Because of this it is always recommended to select both `ECInstanceId` and `ECClassId`.

If different queries are needed for a single output table, then create multiple groups with those different queries but with the same name for each group. That will cause results of all these queries to be concatenated into a single output table. The output table will have column list equal to a union of all properties of groups with the same name. The result rows will be concatenated one after another. If groups are overlapping and multiple groups select the same element the result will contain duplicates.

### Authentication

Requires `Authorization` header with valid Bearer token for scope `itwin-platform`.

For more documentation on authorization and how to get access token visit [OAUTH2 Authorization](https://developer.bentley.com/apis/overview/authorization/) page.

### Authorization

User must have `imodels_write` permission(s) assigned at the iTwin level. iModel specific permissions may also be applied at the iModel level if iModel level permissions are enabled.

Alternatively the user should be an Organization Administrator for the Organization that owns a given iTwin or iModel.

An Organization Administrator must have at least one of the following roles assigned in User Management: Account Administrator, Co-Administrator, or CONNECT Services Administrator. For more information about User Management please visit our Bentley Communities [Licensing, Cloud, and Web Services](https://bentleysystems.service-now.com/community?id=kb_article_view&sys_kb_id=1e5410491b7d8a90f3fc5287624bcb57) wiki page.

### Rate limits

All iTwin Platform API operations have a rate limit. For more documentation on that visit [Rate limits and quotas](https://developer.bentley.com/apis/overview/rate-limits/) page.

### "Try it out" Limitations

When you run an Extraction with the "Try it out" function on a mapping that was created or modified by using the "Try it out" function, you are limited to 100 extracted rows for each group. Mapping modification is any POST/DELETE/PATCH/PUT request to any endpoint with the tag "Mappings" or if the URL contains {mappingId}.

---


update-group

User is not authorized to update a Group.

NoRequestBodyProperties

InvalidQuery

InvalidQueryDataType

---

Creates a mapping for an iModel. There are two ways to create a mapping.

### Create an empty mapping

To create an empty mapping do not provide the `sourceMappingId` property. This will create a new mapping that does not have any groups.

### Create a mapping from an existing mapping

To create a mapping from another mapping provide the `sourceMappingId` property. The server will create a new mapping and copy over all of the groups with their properties from the mapping referenced by the `sourceMappingId` property. User must have `imodels_read` permissions to the iModel containing the source mapping. Changing source mapping, groups, or their properties will not change the copies of them.

Provided `mappingName`, `description`, `extractionEnabled` request body properties will overwrite the properties on the copied mapping.

### Authentication

Requires `Authorization` header with valid Bearer token for scope `itwin-platform`.

For more documentation on authorization and how to get access token visit [OAUTH2 Authorization](https://developer.bentley.com/apis/overview/authorization/) page.

### Authorization

User must have `imodels_write` permission(s) assigned at the iTwin level. iModel specific permissions may also be applied at the iModel level if iModel level permissions are enabled.

Alternatively the user should be an Organization Administrator for the Organization that owns a given iTwin or iModel.

An Organization Administrator must have at least one of the following roles assigned in User Management: Account Administrator, Co-Administrator, or CONNECT Services Administrator. For more information about User Management please visit our Bentley Communities [Licensing, Cloud, and Web Services](https://bentleysystems.service-now.com/community?id=kb_article_view&sys_kb_id=1e5410491b7d8a90f3fc5287624bcb57) wiki page.

### Extraction Triggers & Configuration

Mappings can be configured with `extractionEnabled` set to `true` or `false`. `true` means that extractions will be automatically executed for the given mapping when a ChangesetGroup is completed (see [`ChangesetGroupCompletedEvent`](/apis/webhooks/#supportedevents)). **Note:** Multiple ChangesetGroups can be completed for a single [Synchronization job](/apis/synchronization/) which will result in multiple automatic extractions.

If `extractionEnabled` is set to `false`, the automatic extractions are disabled. However, extractions can still be executed for a specific mapping manually using the [Run Extraction](/apis/grouping-and-mapping/operations/run-extraction) operation and the `mappings` request body parameter. To have a better control over extractions, it is recommended to set `extractionEnabled` to `false` and manually trigger an extraction when a mapping's extracted data is stale and needs to be refreshed.

### Rate limits

All iTwin Platform API operations have a rate limit. For more documentation on that visit [Rate limits and quotas](https://developer.bentley.com/apis/overview/rate-limits/) page.

### "Try it out" Limitations

When you run an Extraction with the "Try it out" function on a mapping that was created or modified by using the "Try it out" function, you are limited to 100 extracted rows for each group. Mapping modification is any POST/DELETE/PATCH/PUT request to any endpoint with the tag "Mappings" or if the URL contains {mappingId}.

---


create-mapping

This will overwrite the description when copying a mapping.

CopyMapping

CreateMapping

User is not authorized to create a Mapping.

MissingMappingName

InvalidMappingName

---

Deletes a mapping.

### Authentication

Requires `Authorization` header with valid Bearer token for scope `itwin-platform`.

For more documentation on authorization and how to get access token visit [OAUTH2 Authorization](https://developer.bentley.com/apis/overview/authorization/) page.

### Authorization

User must have `imodels_write` permission(s) assigned at the iTwin level. iModel specific permissions may also be applied at the iModel level if iModel level permissions are enabled.

Alternatively the user should be an Organization Administrator for the Organization that owns a given iTwin or iModel.

An Organization Administrator must have at least one of the following roles assigned in User Management: Account Administrator, Co-Administrator, or CONNECT Services Administrator. For more information about User Management please visit our Bentley Communities [Licensing, Cloud, and Web Services](https://bentleysystems.service-now.com/community?id=kb_article_view&sys_kb_id=1e5410491b7d8a90f3fc5287624bcb57) wiki page.

### Rate limits

All iTwin Platform API operations have a rate limit. For more documentation on that visit [Rate limits and quotas](https://developer.bentley.com/apis/overview/rate-limits/) page.

### "Try it out" Limitations

When you run an Extraction with the "Try it out" function on a mapping that was created or modified by using the "Try it out" function, you are limited to 100 extracted rows for each group. Mapping modification is any POST/DELETE/PATCH/PUT request to any endpoint with the tag "Mappings" or if the URL contains {mappingId}.

---


delete-mapping

User is not authorized to delete a Mapping.

Specified mapping or any of associated groups is currently in use.

---

Retrieves a mapping.

### Authentication

Requires `Authorization` header with valid Bearer token for scope `itwin-platform`.

For more documentation on authorization and how to get access token visit [OAUTH2 Authorization](https://developer.bentley.com/apis/overview/authorization/) page.

### Authorization

User must have `imodels_read` permission(s) assigned at the iTwin level. iModel specific permissions may also be applied at the iModel level if iModel level permissions are enabled.

Alternatively the user should be an Organization Administrator for the Organization that owns a given iTwin or iModel.

An Organization Administrator must have at least one of the following roles assigned in User Management: Account Administrator, Co-Administrator, or CONNECT Services Administrator. For more information about User Management please visit our Bentley Communities [Licensing, Cloud, and Web Services](https://bentleysystems.service-now.com/community?id=kb_article_view&sys_kb_id=1e5410491b7d8a90f3fc5287624bcb57) wiki page.

### Rate limits

All iTwin Platform API operations have a rate limit. For more documentation on that visit [Rate limits and quotas](https://developer.bentley.com/apis/overview/rate-limits/) page.

---


get-mapping

---

Gets a list of extractions executed on a mapping.

### Authentication

Requires `Authorization` header with valid Bearer token for scope `itwin-platform`.

For more documentation on authorization and how to get access token visit [OAUTH2 Authorization](https://developer.bentley.com/apis/overview/authorization/) page.

### Authorization

User must have `imodels_read` permission(s) assigned at the iTwin level. iModel specific permissions may also be applied at the iModel level if iModel level permissions are enabled.

Alternatively the user should be an Organization Administrator for the Organization that owns a given iTwin or iModel.

An Organization Administrator must have at least one of the following roles assigned in User Management: Account Administrator, Co-Administrator, or CONNECT Services Administrator. For more information about User Management please visit our Bentley Communities [Licensing, Cloud, and Web Services](https://bentleysystems.service-now.com/community?id=kb_article_view&sys_kb_id=1e5410491b7d8a90f3fc5287624bcb57) wiki page.

### Rate limits

All iTwin Platform API operations have a rate limit. For more documentation on that visit [Rate limits and quotas](https://developer.bentley.com/apis/overview/rate-limits/) page.

---


get-mapping-extractions

---

Gets all mappings of an iModel.

### Authentication

Requires `Authorization` header with valid Bearer token for scope `itwin-platform`.

For more documentation on authorization and how to get access token visit [OAUTH2 Authorization](https://developer.bentley.com/apis/overview/authorization/) page.

### Authorization

User must have `imodels_read` permission(s) assigned at the iTwin level. iModel specific permissions may also be applied at the iModel level if iModel level permissions are enabled.

Alternatively the user should be an Organization Administrator for the Organization that owns a given iTwin or iModel.

An Organization Administrator must have at least one of the following roles assigned in User Management: Account Administrator, Co-Administrator, or CONNECT Services Administrator. For more information about User Management please visit our Bentley Communities [Licensing, Cloud, and Web Services](https://bentleysystems.service-now.com/community?id=kb_article_view&sys_kb_id=1e5410491b7d8a90f3fc5287624bcb57) wiki page.

### Rate limits

All iTwin Platform API operations have a rate limit. For more documentation on that visit [Rate limits and quotas](https://developer.bentley.com/apis/overview/rate-limits/) page.

---


get-mappings

---

Updates a mapping.

### Authentication

Requires `Authorization` header with valid Bearer token for scope `itwin-platform`.

For more documentation on authorization and how to get access token visit [OAUTH2 Authorization](https://developer.bentley.com/apis/overview/authorization/) page.

### Authorization

User must have `imodels_write` permission(s) assigned at the iTwin level. iModel specific permissions may also be applied at the iModel level if iModel level permissions are enabled.

Alternatively the user should be an Organization Administrator for the Organization that owns a given iTwin or iModel.

An Organization Administrator must have at least one of the following roles assigned in User Management: Account Administrator, Co-Administrator, or CONNECT Services Administrator. For more information about User Management please visit our Bentley Communities [Licensing, Cloud, and Web Services](https://bentleysystems.service-now.com/community?id=kb_article_view&sys_kb_id=1e5410491b7d8a90f3fc5287624bcb57) wiki page.

### Extraction Triggers & Configuration

Mappings can be configured with `extractionEnabled` set to `true` or `false`. `true` means that extractions will be automatically executed for the given mapping when a ChangesetGroup is completed (see [`ChangesetGroupCompletedEvent`](/apis/webhooks/#supportedevents)). **Note:** Multiple ChangesetGroups can be completed for a single [Synchronization job](/apis/synchronization/) which will result in multiple automatic extractions.

If `extractionEnabled` is set to `false`, the automatic extractions are disabled. However, extractions can still be executed for a specific mapping manually using the [Run Extraction](/apis/grouping-and-mapping/operations/run-extraction) operation and the `mappings` request body parameter. To have a better control over extractions, it is recommended to set `extractionEnabled` to `false` and manually trigger an extraction when a mapping's extracted data is stale and needs to be refreshed.

### Rate limits

All iTwin Platform API operations have a rate limit. For more documentation on that visit [Rate limits and quotas](https://developer.bentley.com/apis/overview/rate-limits/) page.

### "Try it out" Limitations

When you run an Extraction with the "Try it out" function on a mapping that was created or modified by using the "Try it out" function, you are limited to 100 extracted rows for each group. Mapping modification is any POST/DELETE/PATCH/PUT request to any endpoint with the tag "Mappings" or if the URL contains {mappingId}.

---


update-mapping

User is not authorized to update a Mapping.

InvalidExtractionEnabledDataType

create-property

User is not authorized to create a Property.

Property with the same name already exists within the group.

MissingPropertyName

MissingDataType

InvalidPropertyName

InvalidDataType

InvalidQuantityType

MissingECSchemaName

InvalidECSchemaName

InvalidFormula

InvalidCalculatedPropertyType

CalculatedPropertyDataTypeMismatch

CalculatedPropertyQuantityTypeMismatch

---

Deletes a property.

### Authentication

Requires `Authorization` header with valid Bearer token for scope `itwin-platform`.

For more documentation on authorization and how to get access token visit [OAUTH2 Authorization](https://developer.bentley.com/apis/overview/authorization/) page.

### Authorization

User must have `imodels_write` permission(s) assigned at the iTwin level. iModel specific permissions may also be applied at the iModel level if iModel level permissions are enabled.

Alternatively the user should be an Organization Administrator for the Organization that owns a given iTwin or iModel.

An Organization Administrator must have at least one of the following roles assigned in User Management: Account Administrator, Co-Administrator, or CONNECT Services Administrator. For more information about User Management please visit our Bentley Communities [Licensing, Cloud, and Web Services](https://bentleysystems.service-now.com/community?id=kb_article_view&sys_kb_id=1e5410491b7d8a90f3fc5287624bcb57) wiki page.

### Rate limits

All iTwin Platform API operations have a rate limit. For more documentation on that visit [Rate limits and quotas](https://developer.bentley.com/apis/overview/rate-limits/) page.

### "Try it out" Limitations

When you run an Extraction with the "Try it out" function on a mapping that was created or modified by using the "Try it out" function, you are limited to 100 extracted rows for each group. Mapping modification is any POST/DELETE/PATCH/PUT request to any endpoint with the tag "Mappings" or if the URL contains {mappingId}.

---


delete-property

propertyId

User is not authorized to delete a Property.

PropertyNotFound

---

Gets all group properties. If group is a table, then property of that group is a column.

Property values are assigned during data extraction. To start the data extraction use [Run Extraction](/apis/insights/operations/run-extraction) operation.

### Mapping ECProperties

Mapping property values from an iModel ECProperties to the output columns is achieved by defining the `ecProperties` array. It allows mapping the queried, element, element aspect, or related element properties.

The `ecProperties` property is a prioritized array which contains `ECPropertyReference` objects. The closer the `ECPropertyReference` is to the array's start, the higher the priority. The priority of `ECPropertyReference` can be changed by reordering the `ecProperties` array. Reading of the `ecProperties` array stops when a valid value is found. For example, if the `ecProperties` array contains two entries and the first entry results in a null or undefined value, it will take the second entry. The value can be undefined if the given `ECPropertyReference` references an ECProperty which does not exist. The result column will be filled with a null value if no valid value was found.

Evaluating `ecProperties` is prioritized by:

1. Queried properties
2. Element properties
3. Element aspect properties

Having queried properties as the highest priority allows for constant or complex values to be added to a mapping.

ECProperty lookup is defined by three values - `ecSchemaName`, `ecClassName`, and `ecPropertyName`.

`ecSchemaName` and `ecClassName` are used together to create an ECClassId which is the ECClassId of the current row selected by the group query. If the ECClassId of a selected row does not match the `ecSchemaName` and `ecClassName` pair, the value for this ECProperty is considered undefined. If the formed ECClassId is of an element aspect, the current selected row is an element, and there is only one instance of that element aspect related to the element, the property lookup is done on the element aspect.

Both `ecSchemaName` and `ecClassName` can be set to a wildcard value `*`.

- If the value of `ecSchemaName` is `*` and the value of `ecClassName` is `Beam`, then it will match any `Beam` class from any ECSchema (e.g. `Building.Beam`, `Structural.Beam`, etc.)
- If the value of `ecSchemaName` is `Building` and the value of `ecClassName` is `*`, then it will match any class from the ECSchema `Building` (e.g. `Building.Beam`, `Building.CurtainWall`, etc.)
- If values of `ecSchemaName` and `ecClassName` are `*`, then it will match any ECClassId (e.g. `Building.Beam`, `Structural.Column`, etc.)
- If either value of `ecSchemaName` or `ecClassName` are `*`, then no element aspect lookup is done

Class inheritance is checked if there is no wildcard value.

- If the value of `ecSchemaName` is `Building` and the value of `ecClassName` is `StructuralMember`, then it will match any ECClassId which inherits `Building.StructuralMember` (e.g. `Building.Beam` which inherits `Building.StructuralMember`, `Building.Column` which inherits `Building.StructuralMember`, etc.)
- If `ecSchemaName` or `ecClassName` is a wildcard, then inheritance will not be checked

Set `ecPropertyName` to a ECProperty name that you want to select. The value of `ecPropertyName` can also be a path defining how to find an ECProperty. The path segments must be separated by a period (.). The path can contain the names of:

- A navigation property
- A struct property
- A string property that happens to contain a string representation of a json object
- A property inside the selected json

Names of properties are not case sensitive. If json object does not have duplicate property names which only differ in letter casing, then those json properties are not case sensitive. We recommend treating json properties as case sensitive.

- If `Category` property is a navigation property with a value of `{"id":"0x2000000000b","relClassName":"BisCore.GeometricElement3dIsInCategory"}` and the `ecPropertyName` is set to `Category` or `category`, then the whole value `{"id":"0x2000000000b","relClassName":"BisCore.GeometricElement3dIsInCategory"}` will be selected
- If `Category` property is a navigation property with a value of `{"id":"0x2000000000b","relClassName":"BisCore.GeometricElement3dIsInCategory"}` and the `ecPropertyName` is set to `Category.id`, then only the id value `0x2000000000b` will be selected
- If `Category` property is a navigation property and it points to a row that has a property `CodeValue` that we want to select, the `ecPropertyName` should be set to `Category.CodeValue`
- If `Model` property is a navigation property and it points to a row that has a property `JsonProperties` with a value `{"formatter":{"mastUnit":{"label":"m"}}}` and we want to select the master unit label, the `ecPropertyName` should be set to `Model.JsonProperties.formatter.mastUnit.label`. The result will be `m`

### Calculation types

Property can be configured to calculate various element dimensions by setting the `calculatedPropertyType` value.

List of all available calculation types:

- `Length` - calculation of a linear element length or a perimeter of a geometric element that does not have a volume. For elements that have a volume use `BoundingBox` calculations to approximate the length.
- `Area` - calculation of a geometric element's surface area.
- `Volume` - calculation of a geometric element's volume.
- `BoundingBoxLongestEdgeLength` - calculation that gives the longest edge length of an element aligned bounding box.
- `BoundingBoxIntermediateEdgeLength` - calculation that gives the edge length that is not the longest nor the shortest of an element aligned bounding box.
- `BoundingBoxShortestEdgeLength` - calculation that gives the shortest edge length of an element aligned bounding box.
- `BoundingBoxDiagonalLength` - calculation that gives the distance between 2 opposite corners of the element aligned bounding box.
- `BoundingBoxLongestFaceDiagonalLength` - calculation that gives the longest distance between 2 opposite corners of a face on the element aligned bounding box.
- `BoundingBoxIntermediateFaceDiagonalLength` - calculation that gives the distance between 2 opposite corners of a face on the element aligned bounding box that is not the longest nor the shortest.
- `BoundingBoxShortestFaceDiagonalLength` - calculation that gives the shortest distance between 2 opposite corners of a face on the element aligned bounding box.

Calculation types that start with `BoundingBox` use element aligned bounding boxes. They can be used for approximations of geometric element dimensions when there are no available properties that would have exact dimensions. Some errors may occur due to bounding boxes not being a perfect fit for the surrounded element.

### Custom calculations

Property can be configured to evaluate a custom mathematical formula that you provide by setting the `formula` property.

The `formula` supports using other group properties as variables. Recursive formulas are not supported, i.e., `formula` containing a variable `X` is not supported inside a property with a `propertyName` equal to `X`.

Supported data types:

- Double - describes a real number. When converted to a boolean value in logical operators `0` becomes `false` and all other values become `true`
- Integer - describes an integer number. When converted to a boolean value in logical operators `0` becomes `false` and all other values become `true`
- Boolean - describes a logical value which is either true or false. When converted to a number in certain operators `true` becomes `1` and `false` becomes `0`
- String - describes text. When converted to a boolean value in logical operators an empty string becomes `false` and all other strings become `true`

All of the supported data types can have no value which means that the value is `null`. Some operations support `null` values but those which do not will return `null` as the result.

Supported operators:

| Symbol | Name | Precedence | Associativity | Operand Types | Can receive null | Result |
|--|--|--|--|--|--|--|
| Unary `-` | Unary negation | 9 | Right | Numbers and booleans | No | Number |
| `!` | Logical not | 9 | Right | All data types | No | Boolean |
| `**` | Exponentiation | 8 | Right | Numbers and booleans | No | Number |
| `*` | Multiplication | 7 | Left | Numbers and booleans | No | Number |
| `/` | Division | 7 | Left | Numbers and booleans | No | Number |
| `%` | Remainder | 7 | Left | Numbers and booleans | No | Number |
| `+` | Addition | 6 | Left | All data types | No | Number or string if one of the operands is a string |
| Binary `-` | Subtraction | 6 | Left | Numbers and booleans | No | Number |
| `<` | Less than | 5 | Left | All data types | No | Boolean |
| `<=` | Less than or equal | 5 | Left | All data types | No | Boolean |
| `>` | Greater than | 5 | Left | All data types | No | Boolean |
| `>=` | Greater than or equal | 5 | Left | All data types | No | Boolean |
| `==` | Equality | 4 | Left | All data types | Yes | Boolean |
| `!=` | Inequality | 4 | Left | All data types | Yes | Boolean |
| `&&` | Logical and | 3 | Left | All data types | No | Boolean |
| `\|\|` | Logical or | 2 | Left | All data types | No | Boolean |

Parenthesis `(` and `)` can be used to change the precedence of operations. Variables, constants, and functions have a precedence of 1 and left associativity.

Supported constants:

- `E` - Euler's constant and the base of natural logarithms (approx. 2.718)
- `LN2` - natural logarithm of 2 (approx. 0.693)
- `LN10` - natural logarithm of 10 (approx. 2.303)
- `LOG2E` - base-2 logarithm of `E` (approx. 1.443)
- `PI` - ratio of a circle's circumference to its diameter (approx. 3.14159)
- `SQRT1_2` - square root of ½ (approx. 0.707)
- `SQRT2` - square root of 2 (approx. 1.414)

Supported numeric constant formats:

- Decimal, e.g., `123` or `1.123`
- Binary (base 2), e.g., `0b1010`
- Octal (base 8), e.g., `0o1234567`
- Hexadecimal (base 16), e.g., `0x123af`
- Scientific notation, e.g., `1.123e+3`

Supported string literal formats:

- Single quotation marks, e.g., `'Column'`
- Double quotation marks, e.g., `"Column"`
- Backticks, e.g., `` `Column` ``

Supported boolean formats:

- True, e.g., `true`
- False, e.g., `false`

Supported null format:

- Null, e.g., `null`

An escape character `\` can be used to escape special characters in string literals. Supported escape sequences:

- `\'` - single quotation mark
- `\"` - double quotation mark
- `` \` `` - backtick
- `\\` - backslash
- `\n` - newline character
- `\t` - tab character

If an unsupported escape sequence is found, then the escape character is dropped, e.g., `\d` becomes `d`.

Supported numerical functions:

- `abs(x)` - returns the absolute value of `x`
- `acos(x)` - returns the arccosine of `x`
- `acosh(x)` - returns the hyperbolic arccosine of `x`
- `asin(x)` - returns the arcsine of `x`
- `asinh(x)` - returns the hyperbolic arcsine of `x`
- `atan(x)` - returns the arctangent of `x`
- `atanh(x)` - returns the hyperbolic arctangent of `x`
- `atan2(y, x)` - returns the arctangent of the quotient of `y` divided by `x`
- `cbrt(x)` - returns the cube root of `x`
- `ceil(x)` - returns the smallest integer greater than or equal to `x`
- `clz32(x)` - returns the number of leading zero bits of the 32-bit integer `x`
- `cos(x)` - returns the cosine of `x`
- `cosh(x)` - returns the hyperbolic cosine of `x`
- `exp(x)` - returns `E ** x` or `pow(E, x)`, where `x` is the argument, and `E` is Euler's constant (2.718…, the base of the natural logarithm)
- `expm1(x)` - returns subtracting 1 from `exp(x)`
- `floor(x)` - returns the largest integer less than or equal to `x`
- `fround(x)` - returns the nearest single precision float representation of `x`
- `hypot(x, y[, z[, …]])` - returns the square root of the sum of squares of its arguments
- `imul(x, y)` - returns the result of the 32-bit integer multiplication of `x` and `y`
- `log(x)` - returns the natural logarithm of `x`
- `log1p(x)` - returns the natural logarithm of `1 + x`
- `log10(x)` - returns the base-10 logarithm of `x`
- `log2(x)` - returns the base-2 logarithm of `x`
- `max(x, y[, z[, …]])` - returns the largest of 2 or more numbers
- `min(x, y[, z[, …]])` - returns the smallest of 2 or more numbers
- `pow(x, y)` - returns base `x` to the exponent power `y` (i.e., `x**y`)
- `random()` - returns a pseudo-random number between 0 and 1. The value only changes between different output tables. All rows within a single output table get the same value
- `round(x)` - returns the value of the number `x` rounded to the nearest integer
- `sign(x)` - returns the sign of the `x`, indicating whether `x` is positive (`1`), negative (`-1`), or zero (`0`)
- `sin(x)` - returns the sine of `x`
- `sinh(x)` - returns the hyperbolic sine of `x`
- `sqrt(x)` - returns the positive square root of `x`
- `tan(x)` - returns the tangent of `x`
- `tanh(x)` - returns the hyperbolic tangent of `x`
- `trunc(x)` - returns the integer portion of `x`, removing any fractional digits

Supported string functions:

- `charat(str, index)` - returns exactly one character at the specified index. Accepts negative integers, which count back from the last string character
- `concat(str , ...strN)` - combines the text of two (or more) strings and returns a new string
- `padend(str, targetLength [, padString])` - pads the given string from the end with a given string and returns a new string of the length `targetLength`. Maximum value of `targetLength` is `100`. The resulting string will be truncated if it is too long to stay within `targetLength`. The default value for `padString` is " " (white space)
- `padstart(str, targetLength [, padString])` - pads the given string from the start with a given string and returns a new string of the length `targetLength`. Maximum value of `targetLength` is `100`. The resulting string will be truncated if it is too long to stay within `targetLength`. The default value for `padString` is " " (white space)
- `substring(str, beginIndex [, endIndex])` - returns a new string containing characters of `str` from (or between) the specified index (or indices)
- `indexof(str, searchValue [, start])` - returns the index of the first occurance in `str` at which a given string `searchValue` can be found in the array, or -1 if it is not present.
- `tolowercase(str)` - returns the `str` value converted to lowercase
- `touppercase(str)` - returns the `str` value converted to uppercase
- `trim(str)` - trims whitespace from the beginning and end of `str`
- `trimstart(str)` - trims whitespace from beginning of `str`
- `trimend(str)` - trims whitespace from end of `str`

Supported conditional functions:

- `if(cond, expr_true, expr_false)` - returns `expr_true` if `cond` is `true` else it returns `expr_false`. `expr_true` and `expr_false` must be of the same type. `expr_true` and `expr_false` can be `null`
- `ifnull(var, expr)` - returns `expr` if `var` is `null` else it returns `var`. `var` and `expr` must be of the same type. `var` can be `null`
- `ifnotnull(var, expr)` - returns `expr` if `var` is not `null` else it returns `var`. `var` and `expr` must be of the same type. `var` can be `null`
- `ifempty(str, expr)` - returns `expr` if `str` is empty else it returns `str`. `str` and `expr` must be strings
- `ifnotempty(str, expr)` - returns `expr` if `str` is not empty else it returns `str`. `str` and `expr` must be strings
- `ifnullorempty(str, expr)` - returns `expr` if `str` is null or empty else it returns `str`. `str` and `expr` must be strings. `str` can be `null`
- `ifnotnullorempty(str, expr)` - returns `expr` if `str` is not null and not empty else it returns `str`. `str` and `expr` must be strings. `str` can be `null`
- `ifnullorwhitespace(str, expr)` - returns `expr` if `str` is null or empty or only consists of whitespace else it returns `str`. `str` and `expr` must be strings. `str` can be `null`
- `ifnotnullorwhitespace(str, expr)` - returns `expr` if `str` is not null and not empty and not only consists of whitespace else it returns `str`. `str` and `expr` must be strings. `str` can be `null`

Examples of supported formulas:

- `min(A * B, B * C, A * C)` - if `A`, `B`, and `C` are 3 different lengths of box edges, then this formula will result in the smallest side surface area of that box
- `min * max` - formula does not have parenthesis after function names, so the `min` and `max` operands are treated as variables (other columns), not as functions. If the Group has columns `min` and `max`, and their values are `2` and `5`, then the result of this formula is `10` for that row
- `2 ** 3` - 2 raised to the power of 3. Result will be 8. This can also be written as `pow(2, 3)`
- `min(cos(X), sin(X))` - function nesting is supported
- `A * (B + C)` - `A` multiplied by the sum of `B` and `C`
- `A * B + C` - same as `(A * B) + C`
- `padend(concat(A, '\\', touppercase(substring(B, 4))), C, D)` - the result of `concat`, which concatenates variable `A`, string literal `\` and `uppercase` `substring` of variable `B` from index `4`, is padded in the end with the target length of `C` with a pad string of variable `D`
- `charat(trim(A), B)` - gets the character of a trimmed string variable `A` that is at index `B`
- `if(A > B, A, B)` - if `A` is greater than `B` then the result is `A` else it is `B`
- `ifnullorempty(A, 'B = ') + B` - if variable `A` is null or empty then the result of `ifnullorempty` function is the string literal `B = ` else it is variable `A`. Then the final formula result is the addition of the result of `ifnullorempty` function and variable `B`
- `if(A != null && B != null, A + B, 0)` - if `A` is not null and `B` is not null then the result is the addition of `A` and `B` else it is `0`

### Authentication

Requires `Authorization` header with valid Bearer token for scope `itwin-platform`.

For more documentation on authorization and how to get access token visit [OAUTH2 Authorization](https://developer.bentley.com/apis/overview/authorization/) page.

### Authorization

User must have `imodels_read` permission(s) assigned at the iTwin level. iModel specific permissions may also be applied at the iModel level if iModel level permissions are enabled.

Alternatively the user should be an Organization Administrator for the Organization that owns a given iTwin or iModel.

An Organization Administrator must have at least one of the following roles assigned in User Management: Account Administrator, Co-Administrator, or CONNECT Services Administrator. For more information about User Management please visit our Bentley Communities [Licensing, Cloud, and Web Services](https://bentleysystems.service-now.com/community?id=kb_article_view&sys_kb_id=1e5410491b7d8a90f3fc5287624bcb57) wiki page.

### Rate limits

All iTwin Platform API operations have a rate limit. For more documentation on that visit [Rate limits and quotas](https://developer.bentley.com/apis/overview/rate-limits/) page.

---


get-properties

---

Retrieves a property. If group is a table, then property of that group is a column.

Property values are assigned during data extraction. To start the data extraction use [Run Extraction](/apis/insights/operations/run-extraction) operation.

### Mapping ECProperties

Mapping property values from an iModel ECProperties to the output columns is achieved by defining the `ecProperties` array. It allows mapping the queried, element, element aspect, or related element properties.

The `ecProperties` property is a prioritized array which contains `ECPropertyReference` objects. The closer the `ECPropertyReference` is to the array's start, the higher the priority. The priority of `ECPropertyReference` can be changed by reordering the `ecProperties` array. Reading of the `ecProperties` array stops when a valid value is found. For example, if the `ecProperties` array contains two entries and the first entry results in a null or undefined value, it will take the second entry. The value can be undefined if the given `ECPropertyReference` references an ECProperty which does not exist. The result column will be filled with a null value if no valid value was found.

Evaluating `ecProperties` is prioritized by:

1. Queried properties
2. Element properties
3. Element aspect properties

Having queried properties as the highest priority allows for constant or complex values to be added to a mapping.

ECProperty lookup is defined by three values - `ecSchemaName`, `ecClassName`, and `ecPropertyName`.

`ecSchemaName` and `ecClassName` are used together to create an ECClassId which is the ECClassId of the current row selected by the group query. If the ECClassId of a selected row does not match the `ecSchemaName` and `ecClassName` pair, the value for this ECProperty is considered undefined. If the formed ECClassId is of an element aspect, the current selected row is an element, and there is only one instance of that element aspect related to the element, the property lookup is done on the element aspect.

Both `ecSchemaName` and `ecClassName` can be set to a wildcard value `*`.

- If the value of `ecSchemaName` is `*` and the value of `ecClassName` is `Beam`, then it will match any `Beam` class from any ECSchema (e.g. `Building.Beam`, `Structural.Beam`, etc.)
- If the value of `ecSchemaName` is `Building` and the value of `ecClassName` is `*`, then it will match any class from the ECSchema `Building` (e.g. `Building.Beam`, `Building.CurtainWall`, etc.)
- If values of `ecSchemaName` and `ecClassName` are `*`, then it will match any ECClassId (e.g. `Building.Beam`, `Structural.Column`, etc.)
- If either value of `ecSchemaName` or `ecClassName` are `*`, then no element aspect lookup is done

Class inheritance is checked if there is no wildcard value.

- If the value of `ecSchemaName` is `Building` and the value of `ecClassName` is `StructuralMember`, then it will match any ECClassId which inherits `Building.StructuralMember` (e.g. `Building.Beam` which inherits `Building.StructuralMember`, `Building.Column` which inherits `Building.StructuralMember`, etc.)
- If `ecSchemaName` or `ecClassName` is a wildcard, then inheritance will not be checked

Set `ecPropertyName` to a ECProperty name that you want to select. The value of `ecPropertyName` can also be a path defining how to find an ECProperty. The path segments must be separated by a period (.). The path can contain the names of:

- A navigation property
- A struct property
- A string property that happens to contain a string representation of a json object
- A property inside the selected json

Names of properties are not case sensitive. If json object does not have duplicate property names which only differ in letter casing, then those json properties are not case sensitive. We recommend treating json properties as case sensitive.

- If `Category` property is a navigation property with a value of `{"id":"0x2000000000b","relClassName":"BisCore.GeometricElement3dIsInCategory"}` and the `ecPropertyName` is set to `Category` or `category`, then the whole value `{"id":"0x2000000000b","relClassName":"BisCore.GeometricElement3dIsInCategory"}` will be selected
- If `Category` property is a navigation property with a value of `{"id":"0x2000000000b","relClassName":"BisCore.GeometricElement3dIsInCategory"}` and the `ecPropertyName` is set to `Category.id`, then only the id value `0x2000000000b` will be selected
- If `Category` property is a navigation property and it points to a row that has a property `CodeValue` that we want to select, the `ecPropertyName` should be set to `Category.CodeValue`
- If `Model` property is a navigation property and it points to a row that has a property `JsonProperties` with a value `{"formatter":{"mastUnit":{"label":"m"}}}` and we want to select the master unit label, the `ecPropertyName` should be set to `Model.JsonProperties.formatter.mastUnit.label`. The result will be `m`

### Calculation types

Property can be configured to calculate various element dimensions by setting the `calculatedPropertyType` value.

List of all available calculation types:

- `Length` - calculation of a linear element length or a perimeter of a geometric element that does not have a volume. For elements that have a volume use `BoundingBox` calculations to approximate the length.
- `Area` - calculation of a geometric element's surface area.
- `Volume` - calculation of a geometric element's volume.
- `BoundingBoxLongestEdgeLength` - calculation that gives the longest edge length of an element aligned bounding box.
- `BoundingBoxIntermediateEdgeLength` - calculation that gives the edge length that is not the longest nor the shortest of an element aligned bounding box.
- `BoundingBoxShortestEdgeLength` - calculation that gives the shortest edge length of an element aligned bounding box.
- `BoundingBoxDiagonalLength` - calculation that gives the distance between 2 opposite corners of the element aligned bounding box.
- `BoundingBoxLongestFaceDiagonalLength` - calculation that gives the longest distance between 2 opposite corners of a face on the element aligned bounding box.
- `BoundingBoxIntermediateFaceDiagonalLength` - calculation that gives the distance between 2 opposite corners of a face on the element aligned bounding box that is not the longest nor the shortest.
- `BoundingBoxShortestFaceDiagonalLength` - calculation that gives the shortest distance between 2 opposite corners of a face on the element aligned bounding box.

Calculation types that start with `BoundingBox` use element aligned bounding boxes. They can be used for approximations of geometric element dimensions when there are no available properties that would have exact dimensions. Some errors may occur due to bounding boxes not being a perfect fit for the surrounded element.

### Custom calculations

Property can be configured to evaluate a custom mathematical formula that you provide by setting the `formula` property.

The `formula` supports using other group properties as variables. Recursive formulas are not supported, i.e., `formula` containing a variable `X` is not supported inside a property with a `propertyName` equal to `X`.

Supported data types:

- Double - describes a real number. When converted to a boolean value in logical operators `0` becomes `false` and all other values become `true`
- Integer - describes an integer number. When converted to a boolean value in logical operators `0` becomes `false` and all other values become `true`
- Boolean - describes a logical value which is either true or false. When converted to a number in certain operators `true` becomes `1` and `false` becomes `0`
- String - describes text. When converted to a boolean value in logical operators an empty string becomes `false` and all other strings become `true`

All of the supported data types can have no value which means that the value is `null`. Some operations support `null` values but those which do not will return `null` as the result.

Supported operators:

| Symbol | Name | Precedence | Associativity | Operand Types | Can receive null | Result |
|--|--|--|--|--|--|--|
| Unary `-` | Unary negation | 9 | Right | Numbers and booleans | No | Number |
| `!` | Logical not | 9 | Right | All data types | No | Boolean |
| `**` | Exponentiation | 8 | Right | Numbers and booleans | No | Number |
| `*` | Multiplication | 7 | Left | Numbers and booleans | No | Number |
| `/` | Division | 7 | Left | Numbers and booleans | No | Number |
| `%` | Remainder | 7 | Left | Numbers and booleans | No | Number |
| `+` | Addition | 6 | Left | All data types | No | Number or string if one of the operands is a string |
| Binary `-` | Subtraction | 6 | Left | Numbers and booleans | No | Number |
| `<` | Less than | 5 | Left | All data types | No | Boolean |
| `<=` | Less than or equal | 5 | Left | All data types | No | Boolean |
| `>` | Greater than | 5 | Left | All data types | No | Boolean |
| `>=` | Greater than or equal | 5 | Left | All data types | No | Boolean |
| `==` | Equality | 4 | Left | All data types | Yes | Boolean |
| `!=` | Inequality | 4 | Left | All data types | Yes | Boolean |
| `&&` | Logical and | 3 | Left | All data types | No | Boolean |
| `\|\|` | Logical or | 2 | Left | All data types | No | Boolean |

Parenthesis `(` and `)` can be used to change the precedence of operations. Variables, constants, and functions have a precedence of 1 and left associativity.

Supported constants:

- `E` - Euler's constant and the base of natural logarithms (approx. 2.718)
- `LN2` - natural logarithm of 2 (approx. 0.693)
- `LN10` - natural logarithm of 10 (approx. 2.303)
- `LOG2E` - base-2 logarithm of `E` (approx. 1.443)
- `PI` - ratio of a circle's circumference to its diameter (approx. 3.14159)
- `SQRT1_2` - square root of ½ (approx. 0.707)
- `SQRT2` - square root of 2 (approx. 1.414)

Supported numeric constant formats:

- Decimal, e.g., `123` or `1.123`
- Binary (base 2), e.g., `0b1010`
- Octal (base 8), e.g., `0o1234567`
- Hexadecimal (base 16), e.g., `0x123af`
- Scientific notation, e.g., `1.123e+3`

Supported string literal formats:

- Single quotation marks, e.g., `'Column'`
- Double quotation marks, e.g., `"Column"`
- Backticks, e.g., `` `Column` ``

Supported boolean formats:

- True, e.g., `true`
- False, e.g., `false`

Supported null format:

- Null, e.g., `null`

An escape character `\` can be used to escape special characters in string literals. Supported escape sequences:

- `\'` - single quotation mark
- `\"` - double quotation mark
- `` \` `` - backtick
- `\\` - backslash
- `\n` - newline character
- `\t` - tab character

If an unsupported escape sequence is found, then the escape character is dropped, e.g., `\d` becomes `d`.

Supported numerical functions:

- `abs(x)` - returns the absolute value of `x`
- `acos(x)` - returns the arccosine of `x`
- `acosh(x)` - returns the hyperbolic arccosine of `x`
- `asin(x)` - returns the arcsine of `x`
- `asinh(x)` - returns the hyperbolic arcsine of `x`
- `atan(x)` - returns the arctangent of `x`
- `atanh(x)` - returns the hyperbolic arctangent of `x`
- `atan2(y, x)` - returns the arctangent of the quotient of `y` divided by `x`
- `cbrt(x)` - returns the cube root of `x`
- `ceil(x)` - returns the smallest integer greater than or equal to `x`
- `clz32(x)` - returns the number of leading zero bits of the 32-bit integer `x`
- `cos(x)` - returns the cosine of `x`
- `cosh(x)` - returns the hyperbolic cosine of `x`
- `exp(x)` - returns `E ** x` or `pow(E, x)`, where `x` is the argument, and `E` is Euler's constant (2.718…, the base of the natural logarithm)
- `expm1(x)` - returns subtracting 1 from `exp(x)`
- `floor(x)` - returns the largest integer less than or equal to `x`
- `fround(x)` - returns the nearest single precision float representation of `x`
- `hypot(x, y[, z[, …]])` - returns the square root of the sum of squares of its arguments
- `imul(x, y)` - returns the result of the 32-bit integer multiplication of `x` and `y`
- `log(x)` - returns the natural logarithm of `x`
- `log1p(x)` - returns the natural logarithm of `1 + x`
- `log10(x)` - returns the base-10 logarithm of `x`
- `log2(x)` - returns the base-2 logarithm of `x`
- `max(x, y[, z[, …]])` - returns the largest of 2 or more numbers
- `min(x, y[, z[, …]])` - returns the smallest of 2 or more numbers
- `pow(x, y)` - returns base `x` to the exponent power `y` (i.e., `x**y`)
- `random()` - returns a pseudo-random number between 0 and 1. The value only changes between different output tables. All rows within a single output table get the same value
- `round(x)` - returns the value of the number `x` rounded to the nearest integer
- `sign(x)` - returns the sign of the `x`, indicating whether `x` is positive (`1`), negative (`-1`), or zero (`0`)
- `sin(x)` - returns the sine of `x`
- `sinh(x)` - returns the hyperbolic sine of `x`
- `sqrt(x)` - returns the positive square root of `x`
- `tan(x)` - returns the tangent of `x`
- `tanh(x)` - returns the hyperbolic tangent of `x`
- `trunc(x)` - returns the integer portion of `x`, removing any fractional digits

Supported string functions:

- `charat(str, index)` - returns exactly one character at the specified index. Accepts negative integers, which count back from the last string character
- `concat(str , ...strN)` - combines the text of two (or more) strings and returns a new string
- `padend(str, targetLength [, padString])` - pads the given string from the end with a given string and returns a new string of the length `targetLength`. Maximum value of `targetLength` is `100`. The resulting string will be truncated if it is too long to stay within `targetLength`. The default value for `padString` is " " (white space)
- `padstart(str, targetLength [, padString])` - pads the given string from the start with a given string and returns a new string of the length `targetLength`. Maximum value of `targetLength` is `100`. The resulting string will be truncated if it is too long to stay within `targetLength`. The default value for `padString` is " " (white space)
- `substring(str, beginIndex [, endIndex])` - returns a new string containing characters of `str` from (or between) the specified index (or indices)
- `indexof(str, searchValue [, start])` - returns the index of the first occurance in `str` at which a given string `searchValue` can be found in the array, or -1 if it is not present.
- `tolowercase(str)` - returns the `str` value converted to lowercase
- `touppercase(str)` - returns the `str` value converted to uppercase
- `trim(str)` - trims whitespace from the beginning and end of `str`
- `trimstart(str)` - trims whitespace from beginning of `str`
- `trimend(str)` - trims whitespace from end of `str`

Supported conditional functions:

- `if(cond, expr_true, expr_false)` - returns `expr_true` if `cond` is `true` else it returns `expr_false`. `expr_true` and `expr_false` must be of the same type. `expr_true` and `expr_false` can be `null`
- `ifnull(var, expr)` - returns `expr` if `var` is `null` else it returns `var`. `var` and `expr` must be of the same type. `var` can be `null`
- `ifnotnull(var, expr)` - returns `expr` if `var` is not `null` else it returns `var`. `var` and `expr` must be of the same type. `var` can be `null`
- `ifempty(str, expr)` - returns `expr` if `str` is empty else it returns `str`. `str` and `expr` must be strings
- `ifnotempty(str, expr)` - returns `expr` if `str` is not empty else it returns `str`. `str` and `expr` must be strings
- `ifnullorempty(str, expr)` - returns `expr` if `str` is null or empty else it returns `str`. `str` and `expr` must be strings. `str` can be `null`
- `ifnotnullorempty(str, expr)` - returns `expr` if `str` is not null and not empty else it returns `str`. `str` and `expr` must be strings. `str` can be `null`
- `ifnullorwhitespace(str, expr)` - returns `expr` if `str` is null or empty or only consists of whitespace else it returns `str`. `str` and `expr` must be strings. `str` can be `null`
- `ifnotnullorwhitespace(str, expr)` - returns `expr` if `str` is not null and not empty and not only consists of whitespace else it returns `str`. `str` and `expr` must be strings. `str` can be `null`

Examples of supported formulas:

- `min(A * B, B * C, A * C)` - if `A`, `B`, and `C` are 3 different lengths of box edges, then this formula will result in the smallest side surface area of that box
- `min * max` - formula does not have parenthesis after function names, so the `min` and `max` operands are treated as variables (other columns), not as functions. If the Group has columns `min` and `max`, and their values are `2` and `5`, then the result of this formula is `10` for that row
- `2 ** 3` - 2 raised to the power of 3. Result will be 8. This can also be written as `pow(2, 3)`
- `min(cos(X), sin(X))` - function nesting is supported
- `A * (B + C)` - `A` multiplied by the sum of `B` and `C`
- `A * B + C` - same as `(A * B) + C`
- `padend(concat(A, '\\', touppercase(substring(B, 4))), C, D)` - the result of `concat`, which concatenates variable `A`, string literal `\` and `uppercase` `substring` of variable `B` from index `4`, is padded in the end with the target length of `C` with a pad string of variable `D`
- `charat(trim(A), B)` - gets the character of a trimmed string variable `A` that is at index `B`
- `if(A > B, A, B)` - if `A` is greater than `B` then the result is `A` else it is `B`
- `ifnullorempty(A, 'B = ') + B` - if variable `A` is null or empty then the result of `ifnullorempty` function is the string literal `B = ` else it is variable `A`. Then the final formula result is the addition of the result of `ifnullorempty` function and variable `B`
- `if(A != null && B != null, A + B, 0)` - if `A` is not null and `B` is not null then the result is the addition of `A` and `B` else it is `0`

### Authentication

Requires `Authorization` header with valid Bearer token for scope `itwin-platform`.

For more documentation on authorization and how to get access token visit [OAUTH2 Authorization](https://developer.bentley.com/apis/overview/authorization/) page.

### Authorization

User must have `imodels_read` permission(s) assigned at the iTwin level. iModel specific permissions may also be applied at the iModel level if iModel level permissions are enabled.

Alternatively the user should be an Organization Administrator for the Organization that owns a given iTwin or iModel.

An Organization Administrator must have at least one of the following roles assigned in User Management: Account Administrator, Co-Administrator, or CONNECT Services Administrator. For more information about User Management please visit our Bentley Communities [Licensing, Cloud, and Web Services](https://bentleysystems.service-now.com/community?id=kb_article_view&sys_kb_id=1e5410491b7d8a90f3fc5287624bcb57) wiki page.

### Rate limits

All iTwin Platform API operations have a rate limit. For more documentation on that visit [Rate limits and quotas](https://developer.bentley.com/apis/overview/rate-limits/) page.

---


get-property

update-property

User is not authorized to update a Property.

Samples